[radvd-devel-l] I just wonder how to change the destination

[Shu Chao]

Hi ken:
    I have copy your example to be my radvd.conf(change the eth2 to eth1),and this is my two interfaces information:
    eth0      Link encap:Ethernet  HWaddr 00:01:6C:A4:BF:48  
          inet addr:192.168.8.79  Bcast:192.168.255.255  Mask:255.255.0.0
          inet6 addr: 2001:250:f007::1/64 Scope:Global
          inet6 addr: 2001:250:f007:1:201:6cff:fea4:bf48/64 Scope:Global
          inet6 addr: 2001:250:f007:c:201:6cff:fea4:bf48/64 Scope:Global
          inet6 addr: fe80::201:6cff:fea4:bf48/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:69140 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1572 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:6201890 (5.9 MiB)  TX bytes:236840 (231.2 KiB)
          Interrupt:10 Base address:0xe800 
 
eth1        Link encap:Ethernet  HWaddr 00:14:78:3A:B4:B9  
          inet addr:192.168.4.102  Bcast:192.168.255.255  Mask:255.255.0.0
          inet6 addr: 2001:250:f006::1/64 Scope:Global
          inet6 addr: fe80::214:78ff:fe3a:b4b9/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:58937 errors:0 dropped:0 overruns:0 frame:0
          TX packets:31 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000 
          RX bytes:4711749 (4.4 MiB)  TX bytes:3368 (3.2 KiB)
          Interrupt:11 Base address:0xec00 
 
Now the problem is:when I started radvd,neither eth0 or eth1 sent or received  packages,I used radvdump to check,but it blocked there,seemed  no package messages.I use radvd normally before when I used eth1 to send RAs to multicast address.So I don¡¯t know what¡¯s the problem?I have input these command below:
echo "1" > /proc/sys/net/ipv6/conf/all/forwarding
echo "0" > /proc/sys/net/ipv6/conf/all/autoconf
echo "0" > /proc/sys/net/ipv6/conf/all/accept_ra
echo "0" > /proc/sys/net/ipv6/conf/all/accept_redirects           
I don¡¯t know if some of them effect radvd.So please give me a hand.
 
Shu Chao
2006-06-08




Shu Chao
2006-06-08
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.litech.org/pipermail/radvd-devel-l/attachments/20061026/1a6ae8d9/attachment-0001.htm