<DIV>Hi</DIV>
<DIV> </DIV>
<DIV>I wish to know how to make the autoconfiguration enabled and make it work properly for a router.</DIV>
<DIV> </DIV>
<DIV>Let me elobrate my scenatio.</DIV>
<DIV> </DIV>
<DIV>R1-----R2----n1</DIV>
<DIV> </DIV>
<DIV>R1 and R2 are routers. R1 is preconfigured with IPv6 address and sends RADVD. Though R2 is a router, it is not preconfigured with any IPv6 address but i want to it to do address autoconfiguration based on the prefix received from the router R1.</DIV>
<DIV> </DIV>
<DIV>The autoconfiguration works fine as long the /proc/sys/net/ipv6/conf/eth0/forwarding (in the R2) is set to 0 and /proc/sys/net/ipv6/conf/eth0/autoconf is set to 1 . The moment proc/sys/net/ipv6/conf/eth0/forwarding (in the R2) is set to 1 (i,e it becomes a router) /proc/sys/net/ipv6/conf/eth0/autoconf is set to 1. </DIV>
<DIV> </DIV>
<DIV>Does any one know how the make the autoconfiguration work for a router.</DIV>
<DIV> </DIV>
<DIV>Have a nice weekend</DIV>
<DIV> </DIV>
<DIV>Many thanks</DIV>
<DIV> </DIV>
<DIV>Magesh</DIV>
<DIV> </DIV><p>
<hr size=1> <a href="http://us.lrd.yahoo.com/_ylc=X3oDMTFqODRtdXQ4BF9TAzMyOTc1MDIEX3MDOTY2ODgxNjkEcG9zAzEEc2VjA21haWwtZm9vdGVyBHNsawNmYw--/SIG=110oav78o/**http%3a//farechase.yahoo.com/">Yahoo! FareChase - Search multiple travel sites in one click.</a>