Hi All,<br><br>I'd like to change the default for IgnoreIfMissing from off to on. The main reason being if the hub/switch to which RADVD is connected loses power and the only interface goes down, RADVD will exit (and will not restart when the switch/hub regains power). Setting IgnoreIfMissing in the config is simple enough, but I'd like to make RADVD as resilient/robust as possible with minimal configuration. I'd also like to deprecate IgnoreIfMissing (now) and eventually remove it (much later).<br>
<br>If there are reasons not to do this, please let me know...<br><br>Also, if you have any other ideas to make RADVD more resilient, please let share...<br><br>Thanks in advance,<br>Reuben<br>