[radvd-devel-l] radvd wrongly sends all subnets from all interfaces to the first interface
rm at romanrm.ru
Tue Jul 3 10:40:25 EDT 2012
On Tue, 3 Jul 2012 07:31:00 -0700
Reuben Hawkins <reubenhwk at gmail.com> wrote:
> > and configuring both eth0 and eth0.2 separately in radvd.conf), and see if your
> > clients on the LAN which have no VLAN set up also receive RAs that were
> > intended for eth0.2.
> Can you try setting UnicastOnly on all your network interfaces and let
> me know if it fixes the problem?
This does not seem to help, i.e. right after an ifdown/ifup a client node on
eth0 gets only addresses it should (from the :0: subnet), but as soon as radvd
is restarted on the host, addresses from the :2: subnet intended from eth0.2
are also added on the client node.
"Stallman had a printer,
with code he could not see.
So he began to tinker,
and set the software free."
-------------- next part --------------
A non-text attachment was scrubbed...
Size: 198 bytes
Desc: not available
More information about the radvd-devel-l