[radvd-devel-l] radvd wrongly sends all subnets from all interfaces to the first interface

Paul Oranje p.oranje at xs4all.nl
Tue Jul 3 13:02:34 EDT 2012

Couldn't be the cause that the eth0.2 interface (presumed to be 802.1q) is configured with same IP (v6 autoconfigured ) as eth0 because those interfaces share the same MAC address?

Op 3 jul 2012, om 16:40 heeft Roman Mamedov het volgende geschreven:

> On Tue, 3 Jul 2012 07:31:00 -0700
> Reuben Hawkins <reubenhwk at gmail.com> wrote:
>>> and configuring both eth0 and eth0.2 separately in radvd.conf), and see if your
>>> clients on the LAN which have no VLAN set up also receive RAs that were
>>> intended for eth0.2.
>> Can you try setting UnicastOnly on all your network interfaces and let
>> me know if it fixes the problem?
> Hello,
> This does not seem to help, i.e. right after an ifdown/ifup a client node on
> eth0 gets only addresses it should (from the :0: subnet), but as soon as radvd
> is restarted on the host, addresses from the :2: subnet intended from eth0.2
> are also added on the client node.
> -- 
> With respect,
> Roman
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~
> "Stallman had a printer,
> with code he could not see.
> So he began to tinker,
> and set the software free."
> -- 
> radvd-devel-l mailing list  :  radvd-devel-l at litech.org
> http://lists.litech.org/listinfo/radvd-devel-l

More information about the radvd-devel-l mailing list